|
The Miniature Railway Supply Co Ltd
Miniature Railway Equipment Rail, Fittings, Sleepering,- steel or wooden 42 Stratford Way, Boxmoor Hemel Hempstead, Herts HP3 9AS ENGLAND Phone/24hr Answerphone 01442 214702 International Phone/Answerphone +44 1442 214702 www.miniaturerailwaysupply.com e-mail: sales@mrsc.org.uk |
|
| 5/8" (approx 16mm) high Aluminium Rail |
 |
Flat Bottom Rail |
|---|---|
Suitable for Club or Garden Railways |
|
Available in 2.5 or 4 metre lengths |
|
Finish: Ends cold sawn, unpunched |
|
Cutting tolerance is +/- 1cm |
|
Standard pack quantity 14 rails |
| Price per 2.5m length plus VAT | Price per 4m length plus VAT | |||
| Up to 20 metres | 1-8 lengths £ 12.22/length | Up to 20 metres | 1-4 lengths £24.20/length | |
| 22.5-40 metres | 9-16 lengths £ 11.42/length | 24 - 40 metres | 5-10 lengths £22.64/length | |
| 42.5 -97.5metres | 17-39 lengths£ 10.09/length | 44 - 96 metres | 11-24 lengths£ 19.88/length | |
| 100+ metres | 40+ lengths £ 9.73/length | 100+ metres | 25+ lengths £19.18/length |
|
SPECIAL BULK RATE - 2.5 Meter lengths only
300+ metres supplied in multiples of 14 rails of the same length @ ONLY £
3.66 PER METRE plus VAT
Fishplates
4 hole flat pattern, BZP steel @ £1.20 per pair (1 pair required for each rail
length)
Fishbolts and Nuts
Cup headed, Oval necked, M4 x 15mm BZP bolts and Nylock nuts,
sold in packs of 50 or 100 @ £ 10.42 per 100
Moulded Plastic Rail Chairs
2 types available for different sleeper material
Moulded slide on rail chairs to suit 16mm high aluminium rail with
flat base plate for use with wooden sleepers - £12.50 per 100
Screws to suit moulded plastic chairs and hardwood sleepers - £3.80 per 100
Moulded slide on rail chairs to suit 16mm high aluminium rail with
spigot to fit moulded plastic sleepers - £12.50 per 100
Screws to suit moulded plastic chairs and plastic sleepers - £3.80 per 100
Railscrews
2 types available for different sleeper material
Hex Headed (6mm hex) with flange underhead, 19mm long, pilot hole required when
used with hardwood, typical sleeper width 1" (25mm)
sold in packs of 100 @ £3.80 per pack
Hex headed (8mm hex)with flange underhead, BZP, gash point which is self drilling
in softwood, typical sleeper width 2" (50mm) supplied
25mm long, sold in packs of 100 @ £7.00 per pack
Rail curving: to customer's requirements
- £ 2.10 per 2.5 metre length
-£ 3.20 per 4 metre length
Rail end punching for Fishbolts, 2 holes per end - £0.85 per end
| |
